Tenacious Toys Shop News

ROBO-DOU Evangelion Proto Type-00 action figure by Threezero PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/robo-dou-evangelion-proto-type-00-action-figure-by-threezero

PREORDER ships Q4 2021

From the anime film "Evangelion: New Theatrical Edition", ROBO-DOU Evangelion Proto Type-00'

The ROBO-DOU Evangelion Proto Type-00' collectible is a non-scale articulated figure approximately 25cm (9.8”) tall with a remarkable die-cast main frame that provides 48 points of articulation. The figure is constructed of ABS, PVC, POM, and zinc alloy. Threezero's renown paint application techniques is utilized to highlight all the details.

The ROBO-DOU Evangelion Proto Type-00' collectible figure includes many interactive features to increase playability. The Entry Plug hatch can be opened to reveal the Entry Plug inside, and includes two (2) Entry Plug accessories; both a short Entry Plug for inserted mode, and a long Entry Plug for extracted mode. The figure also comes with an Umbilical Cable which can be attached to a socket in the back of the figure. Its equipment includes a Pallet Rifle and an ESV (Enchanted Shield of Virtue). The figure also includes a variety of interchangeable hands in different poses (a pair of relaxed hands, a pair of open hands, a pair of fists, a pair of hands for holding rifle, and a pair of hands for holding shield) and a ROBO-DOU action stand.

Materials: ABS, PVC, POM, ZINC ALLOY

Features:

- Approximately 25cm (9.8”) tall articulated figure (non-scale)

- 48 points of articulation

Accessories:

- Pallet Rifle

- ESV (Enchanted Shield of Virtue)

- Two (2) interchangeable Entry Plugs: Short Entry Plug (for inserted mode), and long Entry Plug (for extracted mode)

- Umbilical Cable

- Interchangeable hands: One (1) pair of relaxed hands, one (1) pair of open hands, one (1) pair of fists, one (1) pair of hands for holding rifles, and one (1) pair of hands for holding shield

- ROBO-DOU action stand

※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

©khara

Aloha Tiki black t-shirt by NEMO PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/aloha-tiki-black-t-shirt-by-nemo

Aloha!

This warm greeting comes to you from sunny and friendly New York City, where the East Coast Tiki master NEMO paints, sculpts and carves his signature tiki-inspired designs from within the gritty city!

NEMO shows us that the concept of Aloha, the breath of life, can come from anywhere. We New Yorkers here extend our gratitude, kindness and respect to each of you, no matter where you are.

Everyone needs a little more Aloha.

This super soft black cotton t-shirt is a preorder, so place your order now in your chosen size before April 14 to ensure that our limited production run of this Aloha shirt includes one for you. We will produce at least 48 of these shirts but no more than 99 total.

These shirts are preorders which are slated to ship in late April or early May.

Design by Mike NEMO Mendez & vectorization by Playful Gorilla.

One-Punch Man Garou FigZero 1/6 Action Figure by ThreeZero PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/one-punch-man-garou-figzero-1-6-action-figure-by-threezero

PREORDER ships Q4 2021

From the anime One-Punch Man SEASON 2, 1/6th scale articulated figure of "Hero Hunter" Garou is for pre-order today.

FigZero 1/6 Articulated Figure: Garou is an approximately 29.5cm tall fully-articulated figure. Its fabric costume includes a long-sleeved shirt, a pair of pants, and a waist belt. The figure includes 5 pairs of interchangeable hands, and one pair of shoes. It also includes 4 pieces of effects parts for the Water Stream Rock Smashing Fist.

Materials: ABS & PVC & POM & PC (Costume uses Fabric)

Features:

- Approximately 29.5cm tall articulated figure

Accessories:

- Long-sleeved shirt
- Pants
- Waist belt
- Shoes
- Total of 5 pairs of interchangeable hands (Fists x 1 pair, posed hands x 4 pairs)
- Water Stream Rock Smashing Fist effects parts x 4pcs

※ In development, not final. Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

©ONE, Yusuke Murata/SHUEISHA, Hero Association HQ

Blue Howler 3-inch double-cast resin by Weston Brownlee PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/bluw-howler-3-inch-resin-by-weston-brownlee

DROPS Feb 23 at noon EST - this item is a preorder which ships in late Feb

Blue Howler is a double-cast resin figure, 3 inches wide and about 2.5" tall. The Blue Howler is an edition of 10 pieces.

Akrolith Fighter 9-inch resin statue PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/akrolith-fighter-9-inch-resin-statue

PREORDER ships December 2021

Akrolith presents a limited edition solid resin art statue that packs a punch. The Akrolith Fighter comes with an eye-catching fluorescent green acrylic display case. Show off your Fighter in the display case, without the cover, or on it’s own. Every Akrolith Fighter base has the edition number laser-engraved into the bottom - certifying your ownership of our limited release.

Material: Solid resin, gloss black finish
Height: 9” tall figure, 10.9” tall display case
Pre-Order: Shipping in October
Edition of 100
produced by @akrolith_

Journey to the Street SUN 8” 2GO action figure by JT Studio PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/journey-to-the-street-sun-8-2go-action-figure-by-jt-studio

PREORDER ships Q2 of 2022 (June 2022)

8”2 GO - JOURNEY TO THE STREET - SUN

“V monster Skateboarding Competition”- the annual feast which plenty of monsters gathering together to participate.

Sun, Pig, Sha, Tang are commissioned to win the biggest prize - Skateboarding Bible.
The concept of 8”2GO series is designed for collectors to carry figures with them.
Therefore, each character will be equipped with a 1:1 carrying bag. The figure and the skateboard are located in different layers to avoid scratches. Meanwhile, you can hang the bag directly on your body by the attached strap.

The proportion of 8” 2GO series is 1/6, the height of 10-12 years old children, about 8 inches(21~23cm). The body has 24 movable joints.

Includes:

Figure x1
Skateboard x1
Bag for figure x1
Bag for you (1:1 size) x1

Harmagedon: Genma Wars Vega 1/6 Scale Figure by Sentinel PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/harmagedon-genma-wars-vega-1-6-scale-figure-by-sentinel

PREORDER ships December 2021

From the classic 1983 anime sci-fi, Harmagedon: Genma Wars, Sentinel presents a 1/6 scale figure of the cyborg warrior Vega. Standing about 12 inches tall, Vega’s unique design has been recreated without giving up any of the details of the original character. About this action figure:

From the anime film Harmagedon: Genma Wars
Over 40 points of articulation
Features built in special gimmicks that will improve the overall range of motion
LED Lights are built into the head and chest
Eyes are movable

©KADOKAWA 1983

Stranger Things 1/6 Demogorgon action figure by Threezero PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/stranger-things-1-6-demogorgon-action-figure-by-threezero

PREORDER ships Q2 2022

Stranger Things – 1/6 Demogorgon stands approximately 16 inches (~40.5cm) tall and features a fully-articulated original body with over 24 points of articulation. The torso, elbow, and ankle joints are cleverly hidden beneath a soft PVC, and utilizes a realistic multi-layered paint application to enhance the creature’s intimidating life-like appearance. The figure includes two interchangeable heads, both opened and closed-mouth, and two pairs of hands for different posing options.

Materials: PVC, ABS, POM

Features:

Approximately 16″ (40.5cm) tall
Articulated figure with 24 points of articulation
Seamless joints in some areas
Highly-detailed paint application

Interchangeable Accessories:

One closed-mouth head
One opened-mouth head
One pair of resting hands
One pair of threatening hands

※ Final product may vary from prototype images.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

STRANGER THINGS ™/© Netflix. Used with permission.

Bonehead 6-inch vinyl figure by Beast Wreck x Strangecat Toys PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/bonehead-6-inch-vinyl-figure-by-beast-wreck-x-strangecat-toys

PREORDER ships Q4 2021

6 inch tall vinyl art toy

Designed by: Beast Wreck

Produced by: Strangecat Toys

Toy2R 36-inch Qee Bear DIY (choose a color) PREORDER today ! ! !

PREORDER NOW:

https://www.tenacioustoys.com/collections/preorders/products/toy2r-36-inch-qee-bear-diy-choose-a-color

SPECIAL ORDER / MADE TO ORDER - LEAD TIME 4 WEEKS BEFORE SHIPMENT

Shipping to China included in price, cost of shipping to any other country is TBD, will be billed separately

The Qee Bear figure by Toy2R is one of the original platform toys that kicked off the designer toy movement. These large fiberglass 36" Qee Bears come in your choice of colors and are special-order items which will be made to order by Toy2R. We can drop ship to any country, shipping cost to your country will be billed after the order is placed and before production begins. Pick up in China is possible. Free shipping promo does not apply to this item.

This is the ultimate accent piece for the home of a true toy collector.

GAKI RACE #0 Zaiki 1/6 scale action figure set by JT Studio PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/gaki-race-0-zaiki-1-6-scale-action-figure-set-by-jt-studio

PREORDER ships Q2 2022

The world are dominated by three realms - Heaven, Mortal, Hell, with the three realms performing their duty, it forms the basis of day and night. Among them, [Hell] is the realm that makes humans tremble in fear, the sins they did in their life are being accounted for here….
In hell, the soul's sins and desire are refined into Soul Energy , other than being the currency of demons, it can be consumed by them to strengthen their power. The demon that became victor of Hell's annual event Hell Racing, are granted a part of the years' worth of Soul Energy.

The Bastard Son of Satan - Zaiki, plan to change [Hell Racing] rules to his own liking, and make it into unrestricted Brawl [GakiRace]. But, will the elite demons allow Zaiki to destroy the tradition of Hell Racing?

Zaiki, the son of Satan and inherited the enormous power from his father, had never been to the outside world. Although possesses the formidable ability, his interests are stealing Soul Energy and causing chaos.

After stealing plenty of novelties from Mortal, Zaiki, who just returned to Hell, remodeled the grabbed motorcycle into GOIMP immediately. Next, he plans to change the tradition of Hell Racing, and make it into unrestricted brawl Gaki Race.

1/6 Figure size : H29cm

• 1/6 GOIMP Motor size : L23xH6.5xW9cm

• Limit 399 Sets

• Approx Shipping Period: Q1-Q2, 2022

• FREE global shipping (Fedex, DHL or USPS according to availability and our choice)

No cancellations of preorders, no refunds. Yes this will take over a year to produce and ship. Use one of our payment plans!

This picture only supplies the prototype reference, actual product may vary slightly

Infinity Saga – DLX Iron Man Mark 44 "Hulkbuster" 12-inch action figure by Threezero PREORDER now ! ! !

PREORDER NOW CLICK THE LINK BELOW:

https://www.tenacioustoys.com/collections/preorders/products/infinity-saga-dlx-iron-man-mark-44-hulkbuster-12-inch-action-figure-by-threezero

PREORDER SHIPS Q1 2022

Infinity Saga – DLX Iron Man Mark 44 "Hulkbuster"

threezero is excited to announce our second collection from Marvel Studio’s The Infinity Saga series, DLX Iron Man Mark 44 “Hulkbuster” armor. This fully-articulated 1/12 scale collectible figure stands at 11.7” (~30cm) tall and is constructed of threezero’s renowned DLX die-cast system with over 65 points of articulation.

DLX Iron Man Mark 44 “Hulkbuster” armor is specially designed to engage in different poses, particularly the signature landing pose. The exterior chest armor and the head of Mark 44 can be opened and the interior panels can slide apart to insert the torso of the Iron Man Mark 43 [3Z0247] figure inside. Together, the two figures form the impressive Hulkbuster.

DLX Iron Man Mark 44 “Hulkbuster” figure has three lighting functions located on the chest, the back, and the eyes; and features functional forearm armor. It includes three pairs of interchangeable hands: One pair of fists, one pair of relaxed hands, and one pair posed for shooting.

Materials: Die-cast zinc alloy, PVC, ABS, other metals.

Features:

Approximately 11.7″ (30cm) tall articulated figure
Over 65 points of articulation
Exterior chest panel opens and interior panels slide apart to fit the Iron Man Mark 43 [3Z0247] torso inside (not included!!!)

LED Light-up features: *

Chest
Back
Eyes

Accessories:

Three (3) pairs of interchangeable hands: One (1) pair of fists, one (1) pair of relaxed hands, one (1) pair of shooting hands.

* Requires AG1 x7 Batteries (Batteries Not Included)

©️ 2021 MARVEL

※ In development. Final product may vary from promotional images.

† NOTE: DLX Iron Man Mark 43 [3Z0247] action figure is sold separately, and not included. Image is for reference only. This product is ONLY the Hulkbuster.

⚠ WARNING: CHOKING HAZARD — This is not a toy. This product contains small parts, and is intended for ages 15 Years +

Tenacious Toys Shop News / #preorder